TRACK PLANT FEATURES

Main Chassis - Main chassis members are constructed from welded beams. These members are engineered to withstand the stresses exerted upon them by both road transport and operation of the plant. The chassis supports all the individual items of the plant and has integral onboard hydraulic stabilising systems for ease of setup on site.

Belt Feeder - 1200mm wide troughed feed belt conveyor fitted with full-length skirt panels and product feed hopper. All bearings are labyrinth sealed and self-aligning spherical roller bearings. The conveyor is driven via dual hydraulic motors and gearboxes mounted at the head drum. The conveyor is fitted with impact rollers under the load area, this allows for the feeding of material from the primary crusher.

Track Frame - is manufactured from heavy-duty frame steel with 4.1m longitudinal centres along with 500 wide tracks as standard with an overall track width of 3m.

Screen Fines Conveyor - Tail conveyor consists of a 1500mm (60”) wide 3-ply conveyor belt mounted under the screen to stockpile the bottom size product, which passes through the screen bottom deck. This conveyor is direct driven by a large capacity hydraulic motor with bi-directional discharge either forward or side conveyor (rear).

Screen Oversize System - A split chute system will be used to achieve several different outcomes of product range. The material passing the top deck and being held on the second deck will discharge onto the side discharge conveyor. Material retained on the top deck will be discharged onto the other side discharge conveyor, and material retained on the bottom deck will be discharged onto the fines conveyor.

Product Conveyors - Any material not passing the bottom deck will be diverted onto the side and forward discharge conveyors. Side and forward conveyors consist of a 750mm (30”) wide 3 ply conveyor belts and 1500mm wide (forward conveyor) fitted to a heavy duty folding conveyor frame. Side conveyors fold for transport by hydraulic means.

Powerpack - The engine is a CAT C7 diesel engine 160kW. The power unit is completely enclosed, and lockable. The engine is protected by an on board diagnostic system which stops the engine in the event of low oil pressure or high engine temperature. Engine RPM are displayed on a combined speed / engine hours readout. An 800-litre fuel tank positioned in the middle of the chassis under the main screen feed conveyor.

Screen Box - 20ft x 6ft Triple Deck Vibrating Screen. Bolt in hardox liners are provided in the feed area to protect the screen feed plates from erosion. The screen is isolated on coil springs, supported front and rear. The shaft drive is coupled to a hydraulic drive motor. Both sides and the back of the screen are accessible by walkways and ladders fitted to the screen support structure.